The vertical and horizontal tracks guide your garage door's rollers through its entire range of motion, and even a slightly bent section can cause the door to bind, stick, or come off track completely. Track damage is often the result of an impact — a car bumper, a stray basketball, or someone leaning on the door — but it can also develop gradually from loose mounting hardware.
The vertical and horizontal tracks guide your garage door's rollers through its entire range of motion, and even a slightly bent section can cause the door to bind, stick, or come off track completely. Track damage is often the result of an impact — a car bumper, a stray basketball, or someone leaning on the door — but it can also develop gradually from loose mounting hardware.
A door that's dragging, sticking in one spot, or making contact noise against the frame is very often a track alignment issue rather than a spring or opener problem.
We check the full length of both tracks for bends, gaps at the joints, and loose or missing mounting brackets, along with how well the tracks are anchored to the framing. Minor bends can sometimes be straightened in place; more significant damage calls for replacing the affected section.
After any track repair, we re-test the door through a full open-close cycle to confirm it's running smoothly and the rollers are tracking correctly before we consider the job done.
Track repair often happens near a door that's under spring tension, and misjudging how a bent track is affecting the balance of the system can lead to further damage or a door that comes off track entirely mid-repair. If you can see obvious track damage, it's worth having it assessed before continuing to run the door through full cycles.
Send a few details and we'll call you back to confirm a time. If it's urgent, call 317-509-9873 directly.
The most common cause is impact — a vehicle, ladder, or other object striking the track or the door itself. Loose mounting hardware over time can also let a track shift slightly out of alignment.
Minor bends can often be straightened in place. More significant damage, especially near a joint or bracket, is usually more reliable to replace outright rather than repair.
It can lead to the door coming off track entirely, which is both an inconvenience and a safety concern since the door is no longer moving predictably. It's worth addressing before it gets worse.
Call now for a straight answer and a real appointment window — or send us a quick request and we'll call you back.